Game Details
This page explains mechanics shared across the game. Individual rival pages list the values that apply to each rival.
Parts and drive torque
Some parts tables show a change to the drive-torque coefficient. The port’s recovered engine calculation multiplies this value into the torque sent through the drivetrain, alongside the selected gear ratio and engine response. It is a coefficient change from the single-part stock baseline, not an increase in engine horsepower or a percentage increase in wheel torque. The field is labelled with its original 0x308 offset for readers following the engine calculation and parts calculation.
Parts and turning response
Some parts also change a yaw response coefficient, labelled with its source offset 0x2E8. The port’s recovered calculations use this value when working out how the car rotates from tyre forces and collisions. The number shown is a coefficient change from the single-part stock baseline; it is not a percentage change in steering or grip. The same value is adjusted for automatically controlled actors, as described below. See the port’s tyre-force calculation and collision calculation.
Parts and initial brake and grip inputs
Some suspension parts list front and rear brake and grip inputs in their additional attributes. These are changes to values used to calculate the initial braking and grip coefficients; they are not percentage changes to braking distance or cornering grip. The separate grip column shows the calculated coefficient change for the single-part stock baseline. The source offsets remain alongside the labels for readers tracing the physical-coefficient calculation and brake and grip bindings.
Shared multipliers
Rivals receive an automatic-control adjustment to the grip values used by the physics. The game doubles the configured front and rear grip coefficients for those actors; that does not mean their cornering speed or final tyre force simply doubles.
When an automatic rival is following another car, its target speed can also change according to their position and the rival’s priority. This is separate from engine power and from the multiplier used for CP rewards. The exact conditions and values are below.
Automatic-control grip multiplier
Rivals and traffic use twice their configured front and rear grip coefficients while the game controls them automatically. The same adjustment can temporarily apply to the player’s car during automatic control, such as a rolling start. It is a shared rule, rather than a part fitted to a particular rival.
The game also adjusts related braking coefficients. These values feed into the physics calculation; they do not mean that a car’s cornering speed or final tyre force is always doubled. The game recalculates the adjustment from the configured values, so it does not keep doubling them every frame.
Show technical details
The source-recovered actor condition update sets all four current grip and brake-input coefficients to 2.00× their configured base values when actor flags contain any of 0xE0 or 0x04. A normal rival has category flag 0x20, and traffic uses 0x40. It also doubles the configured field at source offset 0x310. The manual path can apply wear before the automatic override, so the comparison is to the configured base, not necessarily to a worn manual value.
This follows the actor update around 01D0AA and condition calculation 021A40; the project’s original-data contact test checks configured grip and the automatic/manual transition.
Battle CP rewards
The supported US game’s result calculation combines a rival component, a remaining-SP component and a distance component, then applies the rival’s reward-type multiplier. The rival component for a win changes with encounter history: the source uses a factor of 5 for a rival not previously encountered, 4 for one encountered but not yet defeated, and 2 after a previous defeat. Individual rival pages show the resulting rival component, including that rival’s reward-type multiplier.
Remaining SP and distance can increase the final award, so the amounts listed on rival pages are not fixed total payouts. The source also has an optional 1.5× adjustment to the SP component. It rounds intermediate values, so rounding a combined percentage afterward can produce a different result. A loss or draw has no rival win component in the recovered calculation.
These rules are based on the port’s source-recovered 090420 result calculation and its battle-award tests. Their reward-type multiplier affects CP, not the rival’s car statistics. The port’s optional traffic challenges use a separate custom award calculation.
Rival speed and rubber-banding
The original automatic driver can adjust a non-player rival’s target speed while using its following curve. The adjustment uses the followed actor’s signed relation to the rival, multiplied by 0.3125, and the low four bits of the rival’s source priority. It requires a valid relation and does not run for the player or when the actor follows itself. The two comparisons are strict: at either boundary, this distance adjustment leaves the target unchanged.
| Source category | Scaled signed distance below | Target factor | Scaled signed distance above | Target factor |
|---|---|---|---|---|
| 0 | -20 | 1.20× | 20 | 0.90× |
| 1 | -20 | 1.20× | 25 | 0.90× |
| 2 | -20 | 1.20× | 30 | 0.90× |
| 3 | -20 | 1.20× | 35 | 0.90× |
| 4 | -20 | 1.20× | 40 | 0.90× |
| 5 | -20 | 1.20× | 45 | 0.90× |
| 6 | -20 | 1.25× | 50 | 0.90× |
| 7 | -20 | 1.25× | 55 | 0.90× |
| 8 | -20 | 1.25× | 60 | 0.90× |
| 9 | -20 | 1.25× | 65 | 0.90× |
| 10 | -20 | 1.25× | 70 | 0.90× |
| 11 | -20 | 1.30× | 75 | 0.90× |
| 12 | -20 | 1.30× | 80 | 0.90× |
| 13 | -20 | 1.30× | 85 | 0.90× |
| 14 | -20 | 1.35× | 90 | 0.90× |
| 15 | -20 | 1.35× | 95 | 0.90× |
The selected rival’s source flag 0x02 can apply an additional 0.90× target-speed factor when the runtime actor’s flag 0x04 is also set. This is applied in the following-curve branch and can combine with the distance factor. Individual rival pages show their category-specific values and whether their source flag enables the additional condition. These values change an AI speed target, not engine horsepower, and do not describe every AI speed rule.
The implementation follows the source-recovered 085EA0 relation adjustment and 084E38 flag-gated factor for US T40211N V1.002. The project has source-comparison and boundary tests; full gameplay effects depend on the active driving state.